NERF N-Strike Recon CS-6

£3.245
FREE Shipping

NERF N-Strike Recon CS-6

NERF N-Strike Recon CS-6

RRP: £6.49
Price: £3.245
£3.245 FREE Shipping

In stock

We accept the following payment methods

Description

The Recon has had four direct successors: the 2012 N-Strike Elite Retaliator, the 2015 N-Strike Modulus Recon MKII, the 2019 N-Strike Elite Recon CQ-12, and the 2021 N-Strike Modulus Recon MKIII. This Nerf blaster is based around a tactical rail. The tactical rail allows for a science fiction feeling of entering an intergalactic battle.

Unless they are fired at an angle to get more range, modded Recons have alot of natural limitations to range increases. The O-ring seal on the plunger tubing makes sure that the air compressed by the plunger assembly and spring does not leak out during compression. Some blasters come with an excellent O-ring seal, while others come with undersized or loose O-rings. Improving this seal is an easy mod that can add a few extra feet to your shots. The Nerf Recon features a modular component design, users can swap the various parts to customize it to fit any tactical situation. The pre-recall Recon had an exposed plunger, which had the word "ARMED" written on the side and served as a priming indicator.Today I am going the show you how to do basic all-around beginner--intermediate modifications in the Nerf Recon CS-6 It was re-released in 2021 as the Phoenix CS-10, with additional accessories previously only available with the Echo CS-10.

The Kohls-exclusive Recon CS-6 Special Edition includes a Recon, as well as two additional six dart clip and twelve more Streamline Darts. It has five tactical rails - two on top of the blaster, one on the bottom, and one on each side of the blaster. Step 2: Remove the plunger from the plunger tube and gently pry the O-ring out of its groove with a flat head screwdriver. Be careful not to damage the O-ring if you plan on reusing it. (Pic. 2)For Compact form-factor, it'll be the Recon. Because of its modular design, it can be used just as a pistol, which makes it easier to maneuver around with. Modded ranges are around the same as the Raider (they share similiar internals). The Recon CS-6 features a reverse plunger plunger system. Because of this, it is usually disliked in modding communities. The 2008 version of the blaster notably has a shorter plunger tube, due to the 2008 product recall and redesign of the plunger. A modded blaster can shoot further and with more intensity compared to FOF (fresh out of factory) blasters. It can give you the upper hand in your next battle.

Hasbro Inc. Recalls to Repair Nerf Blasters; Child's Skin Can Get Caught in Plunger of the Toy (Article). Hasbro. Archived from the original on 2008-10-12. Note: Some of the plunger tubing pictured below has been cut out of the plunger for demonstration purposes. Do not do this EVER. The air restrictor (AR) slows down the flow of air from the plunger to the dart. This device serves to reduce the blaster's power and prevent the plunger from slamming into the plunger tubing at full speed, drastically reducing the noise generated during firing. A modification or “mod” is anything you do to your blaster that changes its looks, form, or functionality. Doing a custom paint job, adding your own accessories and parts, and working on the internals to increase power are all considered mods.Step 2: Remove screws. Be sure to make note of each screw's placement, because sizes differ. It is helpful to place the screws on the table in their original positions relevant to an outline of the blaster. There are a total of 15 screws. (Pic. 2)



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop